生物质颗粒燃料成型影响因素研究进展

doi:10.3969/j.issn.1673-5854.2015.05.010

生物质化学工程 ›› 2015, Vol. 49 ›› Issue (5): 53-58.doi: 10.3969/j.issn.1673-5854.2015.05.010

• 综述评论 • 上一篇

生物质颗粒燃料成型影响因素研究进展

黄艳^1,2,3, 杜鹏东^2,3, 张明远^2,3, 汤晶宇^2,3, 韦睿^2,3, 刘灵^2,3, 王晓红^2,3, 张吉利^2,3

1. 中国林业科学研究院林业新技术研究所, 北京 100091;
2. 中国林业科学研究院寒温带林业研究中心, 黑龙江哈尔滨 150086;
3. 国家林业局哈尔滨林业机械研究所, 黑龙江哈尔滨 150086

收稿日期:2015-06-17 出版日期:2015-09-30 发布日期:2015-10-12
通讯作者: 张吉利(1986—),男,工程师,主要从事森林生态研究;E-mail:xtafktj@126.com。 E-mail:xtafktj@126.com
作者简介:黄艳(1988—),女,助理工程师,硕士,主要从事生物质颗粒燃料研究;E-mail:huangyan19881128@163.com
基金资助:
中国林科院中央级公益性科研院所基本科研业务费专项资金(CAFYBB2014QA027);中国林科院林业新技术所基本科研业务费专项资金(CAFINT2014C18)

Research Progress of Factors Affecting the Formation of Biofuel Pellets

HUANG Yan^1,2,3, DU Peng-dong^2,3, ZHANG Ming-yuan^2,3, TANG Jing-yu^2,3, WEI Rui^2,3, LIU Ling^2,3, WANG Xiao-hong^2,3, ZHANG Ji-li^2,3

1. Research Institute of Forestry New Technology, Beijing 100091, China;
2. Research Center of Cold Temperate Forestry, CAF, Harbin 150086, China;
3. Harbin Research Institute of Forestry Machinery, State Forestry Administration, Harbin 150086, China

Received:2015-06-17 Online:2015-09-30 Published:2015-10-12

摘要/Abstract

摘要： 综述了国内外生物质颗粒燃料成型研究资料,分析了颗粒燃料的黏结机理及质量参数,总结了原料含水率、贮藏时间、成型温度、压力等影响因子对颗粒燃料质量的影响,为成型工艺的合理选择及提高生物质颗粒燃料的物理品质提供理论依据和文献参考。

关键词: 生物质, 颗粒燃料, 黏合机制, 成型

Abstract: The literatures about the formation of biofuel pellet research were reviewed. The bonding mechanism and quality parameters of fuel pellet were analyzed, and the influences of material moisture content, storage time, temperature and pressure on pellet quality were summarized. Based on these, a theoretical basis and literature references for reasonable choices of the pelletizing process were provided to improve the physical quality of the biofuel pellets.

Key words: biomass, fuel pellet, binding mechanisms, pelletization

中图分类号:

TQ35

黄艳, 杜鹏东, 张明远, 汤晶宇, 韦睿, 刘灵, 王晓红, 张吉利. 生物质颗粒燃料成型影响因素研究进展[J]. 生物质化学工程, 2015, 49(5): 53-58.

HUANG Yan, DU Peng-dong, ZHANG Ming-yuan, TANG Jing-yu, WEI Rui, LIU Ling, WANG Xiao-hong, ZHANG Ji-li. Research Progress of Factors Affecting the Formation of Biofuel Pellets[J]. bce, 2015, 49(5): 53-58.

参考文献

[1] 张霞,蔡宗寿,陈颖,等.世界生物质颗粒燃料产业发展现状与趋势分析[J].农机化研究,2015(2):1-5.
[2] ESKILSSON D,RÖNNBÄCK M,SAMUELSSON J,et al.Optimisation of efficiency and emissions in pellet burners[J].Biomass and Bioenergy,2004,27(6):541-546.
[3] FIEDLER F.The state of the art of small-scale pellet-based heating system and relevant regulations in Sweden,Austria and Germany[J].Renewable and Sustainable Energy Reviews,2004,8(3):201-221.
[4] 白红春,孙清,周鹏,等.碱处理水稻秆对成型工艺的影响分析[J].农业机械学报,2009,40(3):121-124.
[5] VOULGARAKI S,BALAFOUTIS A,PAPADAKIS G.Legal framework for MBP utilisation[R].Agricultural University of Athens,Department of Natural Resources and Agricultural Engineering,2007.
[6] KALIYAN N,MOREY R V.Factors affecting strength and durability of densified biomass products[J].Biomass and Bioenergy,2009,33(3): 337-359.
[7] FASINA O O,SOKHANSANJ S.Equilibrium moisture relations and heat of sorption of alfalfa pellets[J].Journal of Agricultural Engineering Research,1993,56(1):51-63.
[8] OBERNBERGER I,THEK G.The Pellet Handbook:The Production and Thermal Utilization of Biomass Pellets[M].London:Earthscan,2010.
[9] SUN C C.A material-sparing method for simultaneous determination of true density and powder compaction properties:Aspartame as an example[J].International Journal of Pharmaceutics,2006,326(1):94-99.
[10] SUN C C.Mechanism of moisture induced variations in true density and compaction properties of microcrystalline cellulose[J].International Journal of Pharmaceutics,2008,346(1):93-101.
[11] SUN C C.Decoding powder tabletability:Roles of particle adhesion and plasticity[J].Journal of Adhesion Science and Technology,2011,25(4/5):483-499.
[12] RUMPF H.The Strength of Granules and Agglomerates[M].New York:Interscience,1962:379-418.
[13] MANI S,TABIL L G,SOKHANSANJ S.An overview of compaction of biomass grinds[J].Powder Handling Process,2003(15):160-168.
[14] NIELSEN N P K,GARDNER D J,POULSEN T,et al.Importance of temperature,moisture content,and species for the conversion process of wood residues into fuel pellets[J].Wood and Fiber Science,2009,41(4):414-425.
[15] SAMUELSSON R,THYREL M,SJÖSTRÖM M,et al.Effect of biomaterial characteristics on pelletizing properties and biofuel pellet quality[J].Fuel Processing Technology,2009,90(9):1129-1134.
[16] SAMUELSSON R,LARSSON S H,THYREL M,et al.Moisture content and storage time influence the binding mechanisms in biofuel wood pellets[J].Applied Energy,2012,99:109-115.
[17] STELTE W,HOLM J K,SANADI A R,et al.A study of bonding and failure mechanisms in fuel pellets from different biomass resources[J]. Biomass and Bioenergy,2011,35(2):910-918.
[18] PETTERSSON M,NORDFJELL T.Fuel quality changes during seasonal storage of compacted logging residues and young trees[J].Biomass and Bioenergy,2007,31(11):782-792.
[19] KOCH P.Lodgepole Pine in North America[M].Madison:Forest Products Society,1996.
[20] LINDSTRÖM E,LARSSON S H,BOSTRÖM D,et al.Slagging characteristics during combustion of woody biomass pellets made from a range of different forestry assortments[J].Energy Fuels,2010,24(6):3456-3461.
[21] FILBAKK T,SKJEVRAK G,HØIBØO,et al.The influence of storage and drying methods for Scots pine raw material on mechanical pellet properties and production parameters[J].Fuel Processing Technology,2011,92(5):871-878.
[22] 王建祥,蔡红珍.生物质压缩成型燃料的物理品质及成型技术[J].农机化研究,2008(1):203-205.
[23] 盛奎川,吴杰.生物质成型燃料的物理品质和成型机理的研究进展[J].农业工程学报,2004,20(2):242-245.
[24] 盛奎川,钱湘群,吴杰.切碎棉秆高密度压缩成型的试验研究[J].浙江大学学报,2003,29(2):139-142.
[25] 王民,郭康权,朱文荣.秸秆制作成型燃料的试验研究[J].农业工程学报,1993,9(1):99-103.
[26] RHÉN C,GREF R,SJÖSTRÖM M,et al.Effects of raw material moisture content,densification pressure and temperature on some properties of Norway spruce pellets[J].Fuel Processing Technology,2005,87(1):11-16.
[27] LEHTIKANGAS P.Quality properties of pelletised sawdust,logging residues and bark[J].Biomass and bioenergy,2001,20(5):351-360.
[28] FABORODE M O.Moisture effects in the compaction of fibrous agricultural residues[J].Biological Wastes,1989,28(1):61-71.
[29] 姜洋,曲静霞,郭军,等.生物质颗粒燃料成型条件的研究[J].可再生能源,2006(5):16-18.
[30] 樊峰鸣,张百良,李保谦,等.大粒径生物质成型燃料物理特性研究[J].农业环境科学学报,2005,24(2):398-402.
[31] 蒋剑春,刘石彩,戴伟娣,等.林业剩余物制造颗粒成型燃料技术研究[J].林产化学与工业,1999,19(3):25-30.
[32] OBERNBERGER I,THEK G.Physical characterisation and chemical composition of densified biomass fuels with regard to their combustion behaviour[J].Biomass and Bioenergy,2004,27(6):653-669.
[33] BACK E L.Oxidative activation of wood surfaces for glue bonding[J].Forest Products Journal,1991,41(2):30-36.
[34] STEHR M,JOHANSSON I.Weak boundary layers on wood surfaces[J].Journal of Adhesion Science and Technology,2000,14(10):1211-1224.
[35] BERGSTRÖM D,FINELL M,GREF R.Effects of extractives on the physical characteristics of Scots pine sawdust fuel pellets[J].Forest Products Journal,2010,60(7):640-644.
[36] NIELSEN N P K,GARDNER D J,FELBY C.Effect of extractives and storage on the pelletizing process of sawdust[J].Fuel,2010,89(1):94-98.
[37] 程大莉,许斌,蒋身学.棉秆与竹材颗粒燃料成型工艺及其性能的研究[J].西部林业科学,2014,43(6):39-43.
[38] ASSARSSON A.Hartsets förändrändring under vedlagring[J].Svensk Papperstidning,1969,72(9):304-311.

生物质颗粒燃料成型影响因素研究进展

Research Progress of Factors Affecting the Formation of Biofuel Pellets

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

关于本刊

投稿指南

在线期刊

相关单位

联系我们

[1]	吕鹏,王光辉,王冰,胡德玉. 热解温度和生物质类型对生物炭吸附U(Ⅵ)性能的影响[J]. 生物质化学工程, 2020, 54(5): 15-24.
[2]	梁光兵,李艳红,訾昌毓,张远琴,彭昭霞,赵榆林,赵文波. 生物质发电厂飞灰制备生物炭的研究[J]. 生物质化学工程, 2020, 54(2): 21-26.
[3]	黄萍,贾亮亮,李健,李冬兵. 基于PY-GC/MS技术板栗壳快速热裂解特性的研究[J]. 生物质化学工程, 2020, 54(2): 27-32.
[4]	彭昭霞,李艳红,陈亿琴,梁光兵,黄勇,訾昌毓. 生物质灰硅资源高附加值利用的研究进展[J]. 生物质化学工程, 2020, 54(2): 61-66.
[5]	龚晨,曹雪娟,唐兴,曾宪海,孙勇,林鹿. 减压蒸馏法从生物质水解液中分离提纯乙酰丙酸[J]. 生物质化学工程, 2020, 54(1): 9-15.
[6]	李伟振,姜洋,王微,阴秀丽,王明峰. 温度对4种典型生物质成型特性的影响[J]. 生物质化学工程, 2019, 53(5): 27-33.
[7]	张旭,孙姣,范赢,曹永全,陈文义. 芦苇秆热解特性及动力学分析[J]. 生物质化学工程, 2019, 53(4): 9-18.
[8]	姬文心,曾鸣,丛宏斌,姚宗路,孟海波,赵立欣. 生物质热解反应装置研究现状及展望[J]. 生物质化学工程, 2019, 53(3): 46-58.
[9]	许成功,崔金龙,陈志伟,郭贵宝. 热水预水解提取半纤维素及其还原糖的研究进展[J]. 生物质化学工程, 2019, 53(3): 59-66.
[10]	嵇顺,齐永锋,王妹婷,马如,葛攀乐. 添加剂对秸秆成型燃料燃烧特性的影响[J]. 生物质化学工程, 2019, 53(1): 47-53.
[11]	范方宇, 黄元波, 杨晓琴, 郑云武, 刘灿, 王珍, 郑志锋. 果壳生物质热解特性与动力学[J]. 生物质化学工程, 2018, 52(6): 8-14.
[12]	亚力昆江·吐尔逊, 别尔德汗·瓦提汗, 迪丽努尔·塔力甫, 阿布力克木·阿布力孜, 徐绍平. 生物质和煤共热解特性及催化剂对热解的影响[J]. 生物质化学工程, 2018, 52(5): 31-36.
[13]	翟巧龙, 徐俊明, 苏秋丽, 李芳琳. 木质生物质在不同溶剂作用下的液化反应研究进展[J]. 生物质化学工程, 2018, 52(5): 46-54.
[14]	牛淼淼, 杨佳耀, 李尚, 孙可, 曹坚, 李欣阳. 生物质热解制生物油及其提质研究现状[J]. 生物质化学工程, 2018, 52(5): 55-61.
[15]	王体朋, 张润禾, 彭立, 郭浩强, 陆强, 董长青. 生物质选择性催化热解制备芳香烃的研究进展[J]. 生物质化学工程, 2018, 52(4): 53-59.