[1] 张霞,蔡宗寿,陈颖,等.世界生物质颗粒燃料产业发展现状与趋势分析[J].农机化研究,2015(2):1-5.
[2] ESKILSSON D,RÖNNBÄCK M,SAMUELSSON J,et al.Optimisation of efficiency and emissions in pellet burners[J].Biomass and Bioenergy,2004,27(6):541-546.
[3] FIEDLER F.The state of the art of small-scale pellet-based heating system and relevant regulations in Sweden,Austria and Germany[J].Renewable and Sustainable Energy Reviews,2004,8(3):201-221.
[4] 白红春,孙清,周鹏,等.碱处理水稻秆对成型工艺的影响分析[J].农业机械学报,2009,40(3):121-124.
[5] VOULGARAKI S,BALAFOUTIS A,PAPADAKIS G.Legal framework for MBP utilisation[R].Agricultural University of Athens,Department of Natural Resources and Agricultural Engineering,2007.
[6] KALIYAN N,MOREY R V.Factors affecting strength and durability of densified biomass products[J].Biomass and Bioenergy,2009,33(3): 337-359.
[7] FASINA O O,SOKHANSANJ S.Equilibrium moisture relations and heat of sorption of alfalfa pellets[J].Journal of Agricultural Engineering Research,1993,56(1):51-63.
[8] OBERNBERGER I,THEK G.The Pellet Handbook:The Production and Thermal Utilization of Biomass Pellets[M].London:Earthscan,2010.
[9] SUN C C.A material-sparing method for simultaneous determination of true density and powder compaction properties:Aspartame as an example[J].International Journal of Pharmaceutics,2006,326(1):94-99.
[10] SUN C C.Mechanism of moisture induced variations in true density and compaction properties of microcrystalline cellulose[J].International Journal of Pharmaceutics,2008,346(1):93-101.
[11] SUN C C.Decoding powder tabletability:Roles of particle adhesion and plasticity[J].Journal of Adhesion Science and Technology,2011,25(4/5):483-499.
[12] RUMPF H.The Strength of Granules and Agglomerates[M].New York:Interscience,1962:379-418.
[13] MANI S,TABIL L G,SOKHANSANJ S.An overview of compaction of biomass grinds[J].Powder Handling Process,2003(15):160-168.
[14] NIELSEN N P K,GARDNER D J,POULSEN T,et al.Importance of temperature,moisture content,and species for the conversion process of wood residues into fuel pellets[J].Wood and Fiber Science,2009,41(4):414-425.
[15] SAMUELSSON R,THYREL M,SJÖSTRÖM M,et al.Effect of biomaterial characteristics on pelletizing properties and biofuel pellet quality[J].Fuel Processing Technology,2009,90(9):1129-1134.
[16] SAMUELSSON R,LARSSON S H,THYREL M,et al.Moisture content and storage time influence the binding mechanisms in biofuel wood pellets[J].Applied Energy,2012,99:109-115.
[17] STELTE W,HOLM J K,SANADI A R,et al.A study of bonding and failure mechanisms in fuel pellets from different biomass resources[J]. Biomass and Bioenergy,2011,35(2):910-918.
[18] PETTERSSON M,NORDFJELL T.Fuel quality changes during seasonal storage of compacted logging residues and young trees[J].Biomass and Bioenergy,2007,31(11):782-792.
[19] KOCH P.Lodgepole Pine in North America[M].Madison:Forest Products Society,1996.
[20] LINDSTRÖM E,LARSSON S H,BOSTRÖM D,et al.Slagging characteristics during combustion of woody biomass pellets made from a range of different forestry assortments[J].Energy Fuels,2010,24(6):3456-3461.
[21] FILBAKK T,SKJEVRAK G,HØIBØO,et al.The influence of storage and drying methods for Scots pine raw material on mechanical pellet properties and production parameters[J].Fuel Processing Technology,2011,92(5):871-878.
[22] 王建祥,蔡红珍.生物质压缩成型燃料的物理品质及成型技术[J].农机化研究,2008(1):203-205.
[23] 盛奎川,吴杰.生物质成型燃料的物理品质和成型机理的研究进展[J].农业工程学报,2004,20(2):242-245.
[24] 盛奎川,钱湘群,吴杰.切碎棉秆高密度压缩成型的试验研究[J].浙江大学学报,2003,29(2):139-142.
[25] 王民,郭康权,朱文荣.秸秆制作成型燃料的试验研究[J].农业工程学报,1993,9(1):99-103.
[26] RHÉN C,GREF R,SJÖSTRÖM M,et al.Effects of raw material moisture content,densification pressure and temperature on some properties of Norway spruce pellets[J].Fuel Processing Technology,2005,87(1):11-16.
[27] LEHTIKANGAS P.Quality properties of pelletised sawdust,logging residues and bark[J].Biomass and bioenergy,2001,20(5):351-360.
[28] FABORODE M O.Moisture effects in the compaction of fibrous agricultural residues[J].Biological Wastes,1989,28(1):61-71.
[29] 姜洋,曲静霞,郭军,等.生物质颗粒燃料成型条件的研究[J].可再生能源,2006(5):16-18.
[30] 樊峰鸣,张百良,李保谦,等.大粒径生物质成型燃料物理特性研究[J].农业环境科学学报,2005,24(2):398-402.
[31] 蒋剑春,刘石彩,戴伟娣,等.林业剩余物制造颗粒成型燃料技术研究[J].林产化学与工业,1999,19(3):25-30.
[32] OBERNBERGER I,THEK G.Physical characterisation and chemical composition of densified biomass fuels with regard to their combustion behaviour[J].Biomass and Bioenergy,2004,27(6):653-669.
[33] BACK E L.Oxidative activation of wood surfaces for glue bonding[J].Forest Products Journal,1991,41(2):30-36.
[34] STEHR M,JOHANSSON I.Weak boundary layers on wood surfaces[J].Journal of Adhesion Science and Technology,2000,14(10):1211-1224.
[35] BERGSTRÖM D,FINELL M,GREF R.Effects of extractives on the physical characteristics of Scots pine sawdust fuel pellets[J].Forest Products Journal,2010,60(7):640-644.
[36] NIELSEN N P K,GARDNER D J,FELBY C.Effect of extractives and storage on the pelletizing process of sawdust[J].Fuel,2010,89(1):94-98.
[37] 程大莉,许斌,蒋身学.棉秆与竹材颗粒燃料成型工艺及其性能的研究[J].西部林业科学,2014,43(6):39-43.
[38] ASSARSSON A.Hartsets förändrändring under vedlagring[J].Svensk Papperstidning,1969,72(9):304-311. |