1 |
BAIKER M , PIETERMAN R , ZOON P . Toolmark variability and quality depending on the fundamental parameters: Angle of attack, toolmark depth and substrate material[J]. Forensic Science International, 2015, 251, 40- 49.
doi: 10.1016/j.forsciint.2015.03.003
|
2 |
MICHAEL D C . Toolmark identification of a mattock to a clod of soil from a grave[J]. Journal of Forensic Sciences, 2011, 56 (1): 241- 243.
doi: 10.1111/j.1556-4029.2010.01537.x
|
3 |
SPRINGER E , DUMITRA A . A historical, detailed toolmark exa mination from 1916[J]. Journal of Forensic Sciences, 2019, 64 (4): 1067- 1077.
doi: 10.1111/1556-4029.13988
|
4 |
《法学词典》编辑委员会编. 法学词典[M]. 上海: 上海辞书出版社, 1980: 179
|
5 |
左琦, 王晨昇. 扫描技术在痕迹提取中的应用[J]. 中国公共安全(学术版), 2019, (1): 107- 109.
|
6 |
刘燕, 丰雪松, 罗小青, 等. 3D打印技术在工具痕迹提取中的应用探究[J]. 云南警官学院学报, 2018, (6): 120- 124.
doi: 10.3969/j.issn.1672-6057.2018.06.022
|
7 |
王震, 张谦. 加成型室温硫化硅橡胶印模材料在痕迹提取中的应用研究[J]. 中国刑警学院学报, 2013, (4): 36- 38.
|
8 |
OPREA S . Properties of polymer networks prepared by blending polyester urethane acrylate with acrylated epoxidized soybean oil[J]. Journal of Materials Science, 2010, 45 (5): 1315- 1320.
doi: 10.1007/s10853-009-4084-5
|
9 |
张毅, 王文, 王渝霞, 等. 用改性热塑性树脂制模提取立体痕迹的研究[J]. 刑事技术, 2003, (5): 19- 21.
doi: 10.3969/j.issn.1008-3650.2003.05.006
|
10 |
王贵容, 王元, 陈振乾, 等. 一种新型立体痕迹制模材料的研究[J]. 中国人民公安大学学报(自然科学版), 2008, 14 (2): 24- 26.
doi: 10.3969/j.issn.1007-1784.2008.02.006
|
11 |
许卫星, 丁辉. 牙科纳米氧化铝复合树脂的制备与性能研究[J]. 口腔材料器械杂志, 2020, 29 (2): 11- 15.
|
12 |
黄元波, 郑志锋, 马焕, 等. 橡胶籽油基多元醇的制备与表征[J]. 生物质化学工程, 2017, 51 (3): 21- 26.
|
13 |
曾晓鹰, 詹建波, 余振华. 电子束固化涂料及应用[M]. 天津: 天津大学出版社, 2014: 4- 133.
|
14 |
张飞, 胡云, 刘承果, 等. 羟基化木本油脂的合成及其结构表征[J]. 林产化学与工业, 2018, 38 (6): 27- 32.
|
15 |
ZHANG F, HU Y, ZHANG J S, et al. High-performance UV-curable polyurethane acrylate resins derived from low-iodine woody plant oils[J/OL]. Materials Today Communications, 2020, 25: 101526[2020-11-11]. https://doi.org/10.1016/j.mtcomm.2020.101526.
|