Welcome to Biomass Chemical Engineering,

›› 2008, Vol. 42 ›› Issue (4): 27-30.

• 研究报告 • Previous Articles     Next Articles

Study on Characteristics and Bio-treatment of Effluent from Eucalyptus P-RC APMP Process

HAN Biao1, SHI Ying-qiao2, DING Lai-bao2, LI Ping2, FANG Gui-gan2   

  1. 1. Institute of Guangxi Environment Science, Nanning 530022, China;2. Institute of Chemical Industry of Forest Products, CAF;Key and Open Lab.on Forest Chemical Engineering, SFA, Nanjing 210042, China
  • Received:2008-01-07 Revised:1900-01-01 Online:2008-07-30 Published:2008-07-30

Abstract: Characteristics of effluent from eucalyptus P-RC APMP process were analyzed comprehensively for the first time. The results indicate that when producing 1 t of eucalyptus P-RC APMP, 26.7 -m3 water was consumed, and in the effluent discharqed COD of 114.8 kg, BOD of 35.7 kg, SS of 42.1 kg were determined. When anaerobic treatment in the charge of 5 g COD/(L·d), COD in the effluent removed was 61.3%, meanwhile, 73.7% of COD was removed after further aerobic treatment at the level of HRT 24 h. The bio-treated effluent, after primary coagulation treatment, could easily come up to the state standard of effluent discharge GB 3544-2001. By advanced coagulation treatment, COD and SS in the bio-treated effluent were less than the level of 200 mg/L and 60 mg/L, respectively, meeting the environmental protection requirement.

Key words: eucalyptus, P-RC APMP, effluent, pollution characteristics, bio-treatment

CLC Number: