生物质炭成型燃料的成型机理及制备工艺研究进展

doi:10.3969/j.issn.1673-5854.2017.06.011

Abstract

Abstract: The preparation technologies of molding fuel of biomass charcoal were summarized. The selection of adhesives was emphasized. The advantages and disadvantages of organic adhesives, including starch-based, lignin-based and carboxymethyl cellulose-based, and inorganic adhesives were analyzed. The influences of water and particle size of biomass on the fuels were analyzed, too. In addition, the molding processes of different equipments were summarized and the research direction of developing biomass fuel with high added value in the future was pointed out.

Key words: biomass charcoal, molding fuel, adhesive, forming mechanism

CLC Number:

TQ35

LI Zeya, WU Lin, RAO Wenhao, TONG Kun, ZHANG Qi, LIU Ying. Research Progress on Molding Mechanism and Preparation Process of Molding Fuel of Biomass Charcoal[J]. bce, 2017, 51(6): 62-66.

References

[1] 侯坚,张培栋,张宝茸,等. 中国林业生物质能源资源开发利用现状与发展建议[J]. 可再生能源,2009,27(6):113-114.
[2] 余珂,胡兆吉,刘秀英. 国内外生物质能利用技术研究进展[J]. 江西化工,2006(4):30-33.
[3] 刘石彩,蒋剑春. 生物质能源转化技术与应用(Ⅱ)-生物质压缩成型燃料生产技术和设备[J]. 生物质化学工程,2007,41(4):59-63.
[4] 张霞,蔡宗寿,陈丽红,等. 生物质成型燃料致密成型机理及品质评价指标[J]. 可再生能源,2014,32(12):1917-1919.
[5] 景元琢,董玉平,盖超,等. 生物质固化成型技术研究进展与展望[J]. 中国工程科学,2011,12(2):71-76.
[6] 郑海金,田大民,徐绍平. 成型粘结剂及粒度对炭分子筛性能的影响[J]. 河南大学学报:自然科学版,2005,35(2):38-40.
[7] LINDLEY J A,VOSSOUGHI M. Physical properties of biomass briquettes[J]. Transactions of the Asae American Society of Agricultural Engineers,1989,32(2):361-366.
[8] 卢寿慈. 粉体技术手册[M]. 北京:化学工业出版社,2004.
[9] 刘志坤,叶黎佳. 生物质炭化材料制备及性能测试[J]. 生物质化学工程,2007,41(5):28-32.
[10] FUERTES A B,CAMPS ARBESTAIN M,SEVILLA M,et al. Chemical and structural properties of carbonaceous products obtained by pyrolysis and hydrothermal carbonization of corn stover[J]. Australian Journal of Soil Research,2010,48:618-626.
[11] 盛奎川,吴杰. 生物质成型燃料的物理品质和成型机理的研究进展[J]. 农业工程学报,2004,20(2):242-245.
[12] LIN Y Y,MAO S F. Potential and its effect on compaction of biomass fuel logs[J]. Biomass and Bioenergy,2001,20(3):217-222.
[13] 郝蓉,彭少麟,宋艳暾,等. 不同温度对黑碳表面官能团的影响[J]. 生态环境学报,2010,19(3):528-531.
[14] 王靖哲,乔文龙,张龙. 改性淀粉基木材用环保胶粘剂的合成研究[J]. 中国胶粘剂,2009,18(5):43-47.
[15] 林险峰,庞振祥. 不同氧化方法生产改性玉米淀粉粘合剂的比较研究[J]. 吉林师范大学学报:自然科学版,2004,25(4):8-10.
[16] 胡孝勇,陈薇,谭景琳. 淀粉胶粘剂的研究进展[J]. 粘接,2008,29(7):41-44.
[17] 杨光,范太炳. 玉米淀粉胶粘剂的改性研究[J]. 中国胶粘剂,2003,12(3):34-37.
[18] 段红燕,周建斌,李思思,等. 玉米淀粉基可燃性胶黏剂的配方研究[J]. 生物质化学工程,2010,44(4):29-33.
[19] 李虎,孙奇,邢丹丹. 木质纤维成型机理及其成型因素分析[J]. 木工机床,2014(03):10-13.
[20] 许绍良. 一种生产高强度后成型生物质炭的生产方法:CN 200610150049.0[P]. 2008-04-30.
[21] 李健,刘雅南,刘宁,等. 羧甲基纤维素的制备研究及应用现状[J]. 食品工业科技,2014,8(35):379-382.
[22] 张珺,金就砺,李铮,等. 一种炭燃棒:CN 1169930C[P]. 2002-02-27.
[23] 耿玉国. 一种木炭粉型材及制备方法:CN 200410010341.3[P]. 2005-02-23.
[24] 崔锦棠. 一种烧烤用木炭的制作方法:CN 1271208A[P]. 2010-10-18.
[25] LEHTIKANGAS P. Storage effects on pelletised sawdust, logging residues and bark[J]. Biomass and Bioenergy,2000,19(5):287-293.
[26] 张静,郭玉明,贠慧星. 原料含水率对生物质固体燃料成型效果的影响[J]. 山西农业科学,2012,40(1):65-67.
[27] 郭康权,赵东,查养社,等. 植物材料压缩成型时粒子的变形及结合形式[J]. 农业工程学报,1995,11(1):138-143.
[28] 徐颖惠. 炭末制备火锅型炭的研究[J]. 福建化工,2001,3:23-25.
[29] 邓波. 生物质固化成型特性及有限元研究[D]. 济南:山东大学硕士学位论文,2008.
[30] 郑戈,杨世关,孔书轩,等. 生物质压缩成型技术的发展与分析[J]. 河南农业大学学报,1998,32(4):349-354.
[31] 严永林. 生物质固化成型设备的研究[J]. 林业机械与木工设备,2003,31(12):19-21.

Research Progress on Molding Mechanism and Preparation Process of Molding Fuel of Biomass Charcoal

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments

[1]	Jiabao CHEN,Guangbin WANG,Jingya NAN,Lijun WANG,Chunpeng WANG,Fuxiang CHU. The Application Performance of Two-component Soybean Based Adhesive Treated by Sulfurous Acid [J]. Biomass Chemical Engineering, 2019, 53(6): 9-14.
[2]	Guangbin WANG,Lijun WANG,Jiabao CHEN,Ling LI,Chunpeng WANG,Fuxiang CHU,Yuzhi XU. Rheological Behaviors and Curing Properties of Synergistic Cross-linked Soybean Based Adhesives [J]. Biomass Chemical Engineering, 2019, 53(5): 9-14.
[3]	HOU Xing'ai, SUN Fengwen, LIU Longlong, MI Ling. Research on Phenol Liquefied Products of Peanut Shell-urea-formaldehyde Resin Adhesive [J]. bce, 2018, 52(6): 31-37.
[4]	WANG Rongxing, ZHANG Zuxin, CHEN Riqing, ZHAO Linwu, WANG Chunpeng. Adhesion Properties of Urea-modified Phenol Formaldehyde Resin for Plywood [J]. bce, 2018, 52(5): 20-24.
[5]	WANG Li-jun, XIA Cheng-long, XU Yu-zhi, NAN Jing-ya, WANG Chun-peng, CHU Fu-xiang. Rheological Properties of Two-component Soybean Based Adhesives [J]. bce, 2016, 50(6): 56-60.
[6]	ZHOU Jian-zhong;YU Li-yan;MA Hai-jie;KE Da-wei;GUO Ming. Preliminary Study on Preparation of Emulsion Bamboo Cellulose-acrylate Pressure-sensitive Adhesive [J]. , 2012, 46(6): 21-24.
[7]	ZHUANG Xiao-wei;MU You-bing;PAN Xin;ZHANG Jiang-li;WANG Chun-peng;ZHAO Lin-wu. Applications of Alkali Lignin/Phenol-formaldehyde Resin in Bamboo Plywood [J]. , 2011, 45(5): 17-20.
[8]	LIU Shi-cai;BIAN Yi;TONG Ya-juan;JIANG Jian-chun. Forming Process and Combustion Properties of Biomass Charcoal Powder [J]. , 2011, 45(1): 10-14.
[9]	LV Wei;JIANG Jian-chun;LIU Shi-cai;XU Jun-ming. Research Progress on Molding Fuel of Biomss Charcoal Preparation and Performance [J]. , 2010, 44(5): 48-52.
[10]	MU You-bing;SHI Juan-juan;WANG Chun-peng;ZHAO Lin-wu;CHU Fu-xiang;MO Ya-li. Application of Lignin in Wood Adhesives [J]. , 2009, 43(3): 42-46.
[11]	YU Qiang;;LUO Yi;YUAN Zheng-hong;DU Wen-he;YUAN Guo-bao. Research of Bio-based Adhesive Used for Rice Seeding [J]. , 2008, 42(6): 19-22.
[12]	ZHUANG Xiao-wei;LIU Zhi-kun;CHEN Shun-wei;YE Li-jia. Progress of Research on Structure and Properties of Biomass Charcoal Composite [J]. , 2008, 42(2): 45-49.
[13]	PANG Jiu-yin;DONG Li-na;ZHANG Shi-cheng. Research Progress of Hybrid Adhesive Based on Soy Protein [J]. , 2008, 42(2): 41-44.
[14]	ZHOU Jian-bin;ZHANG He-ling;DENG Cong-jing;ZHANG Qi-sheng. Study on Preparation of Phenol-formaldehyde Resin Adhesive from Bamboo Tar Substituted Phenol [J]. , 2008, 42(2): 8-10.
[15]	SHI Jun-you;GU Ji-you;TU Huai-gang;WANG Shu-min. Property Analysis and Production Test of Starch-based API Adhesive [J]. , 2008, 42(2): 1-7.