欢迎访问《生物质化学工程》,

生物质化学工程 ›› 2017, Vol. 51 ›› Issue (1): 20-26.doi: 10.3969/j.issn.1673-5854.2017.01.004

• 研究报告 • 上一篇    下一篇

脲醛树脂合成过程中游离甲醛的抑制

赵厚宽1,2, 王鹏1,2, 谢星鹏3, 叶哲孜1,2, 谢益民1,2   

  1. 1. 湖北工业大学 制浆造纸研究院, 湖北 武汉 430068;
    2. 湖北工业大学 轻工材料湖北省重点实验室, 湖北 武汉 430068;
    3. 武汉生物工程学院 药学院, 湖北 武汉 430415
  • 收稿日期:2016-06-12 出版日期:2017-01-30 发布日期:2017-01-23
  • 通讯作者: 谢益民(1965-),教授,博士生导师,主要从事植物纤维化学的研究工作;E-mail:ppymxie@163.com。 E-mail:ppymxie@163.com
  • 作者简介:赵厚宽(1990-),男,山东枣庄人,硕士生,主要从事植物纤维化学的研究工作
  • 基金资助:
    国家自然科学基金资助项目(31370574,31300494);湖北省教育厅创新团队项目(12053)

Inhibition of Free Formaldehyde in Synthesis of Urea-formaldehyde Resin

ZHAO Houkuan1,2, WANG Peng1,2, XIE Xingpeng3, YE Zhezi1,2, XIE Yimin1,2   

  1. 1. Research Institute of Pulp and Paper Engineering, Hubei University of Technology, Wuhan 430068, China;
    2. Hubei Provincial Key Laboratory of Green Materials for Light Industry, Hubei University of Technology, Wuhan 430068, China;
    3. Wuhan Institute of Bioengineering, School of Pharmacy, Wuhan 430415, China
  • Received:2016-06-12 Online:2017-01-30 Published:2017-01-23

摘要: 研究了脲醛树脂合成过程中抑制游离甲醛的方法,讨论了合成工艺的优化以及单宁酸和可溶性碱木质素作为降醛剂的效果。结果表明:优化后的合成工艺为甲醛与尿素的物质的量比为1.2:1,缩聚反应阶段温度和pH值分别为95℃和5.0,三聚氰胺用量为尿素与甲醛总质量的2%,聚乙烯醇用量为尿素质量的1%。采用该工艺条件可使的产品中游离甲醛的量降到0.18%,黏度为16.2s,固体质量分数为52.96%,储存时间大于45d。采用单宁酸用量为尿素质量的2%时,产品中游离甲醛量为0.09%,固体质量分数为53.44%,黏度为16.9s;可溶性碱木质素用量为尿素质量的5%时,游离甲醛的量为0.15%,其他指标与添加单宁酸的样品相似。

关键词: 脲醛树脂, 游离甲醛, 降醛剂, 单宁酸, 木质素

Abstract: The methods of inhibiting free formaldehyde in the synthesis of urea-formaldehyde resins are investigated. The optimization of synthesis process and the effects of tannic acid and water-soluble alkali lignin as formaldehyde-reducing agents are discussed. The results show that the optimum conditions are the molar ratio of formaldehyde to urea 1.2:1, the temperature and pH value in condensation reaction 95℃ and 5.0, the dosage of melamine 2% of the total mass of urea and formaldehyde and the dosage of polyvinyl alcohol 1% of the urea mass. The content of free formaldehyde in the product obtained under the optimum conditions can be reduced to 0.18% with the viscosity of 16.2s and solid content of 52.96%. And the storage time is more than 45d. When the dosage of tannic acid is 2% of urea, the content of formaldehyde in the product can be further reduced to 0.09% with the solid content of 53.44% and viscosity of 16.9s. The content of free formaldehyde is 0.15% when the dosage of soluble alkali lignin is 5% of urea and the other characteristics are similar to the sample with addition of tannic acid.

Key words: urea-formaldehyde resin, free formaldehyde, formaldehyde-reducing agent, tannic acid, lignin

中图分类号: